Nexus Learn

Lecture 23: Fuzzy Inference: Mamdani and Sugeno

Lecture Notes CS-511 Artificial Intelligence 6 min read Updated 8 Nov 2026

↓ Download notes (Word)

On this page
  1. Learning Outcomes
  2. 1. The Fuzzy Inference Process
  3. 2. Mamdani Inference
  4. 3. Sugeno Inference
  5. 4. Common Mistakes
  6. Word Bank
  7. Self-Check Questions

Learning Outcomes

SLO

After this lecture you will be able to...

CLO

Bloom

SLO 23.1

Explain the five steps of fuzzy inference: fuzzify, apply operators, implication, aggregation, defuzzify

CLO3

C2 Understand

SLO 23.2

Apply Mamdani inference: firing strengths, clip or scale, max aggregation and defuzzification methods

CLO3

C3 Apply

SLO 23.3

Apply zero- and first-order Sugeno inference and compare it with Mamdani

CLO3

C3 Apply

1. The Fuzzy Inference Process

§1.1 Five steps

Slide L23-S06

A fuzzy inference system (FIS) turns crisp inputs into a crisp output using membership functions and IF-THEN rules. Inference means reaching a conclusion from facts and rules.

Step

What happens

Fan at 30 °C, 40 %

1 Fuzzify

Crisp input -> degree in each term

comfortable 0.33, hot 0.20, dry 0.33

2 Apply operators

AND = min, OR = max, NOT = 1 - μ -> firing strength

R3 = min(0.33, 0.67) = 0.33

3 Implication

Shape each THEN set by its strength (clip or scale)

'fast' clipped at 0.20

4 Aggregation

Join all rule outputs into one set (max)

max of four clipped shapes

5 Defuzzify

Turn the set into one number (centroid)

45.04 %

R1 IF temp is cold THEN fan is slow

R2 IF temp is comfortable AND hum is dry THEN fan is slow

R3 IF temp is comfortable AND hum is NOT dry THEN fan is medium

R4 IF temp is hot AND hum is dry THEN fan is medium

R5 IF temp is hot AND hum is NOT dry THEN fan is fast

§1.2 Steps 1 and 2 worked

Slide L23-S07

Step 1 Fuzzify the inputs

temp 30 C is cold 0.00

temp 30 C is comfortable 0.33

temp 30 C is hot 0.20

humidity 40 % is dry 0.33

Step 2 Apply AND (min) / NOT (1 - mu) -> firing strengths

R1 IF cold THEN slow 0.00

R2 IF comfortable AND dry THEN slow 0.33

R3 IF comfortable AND NOT dry THEN medium 0.33

R4 IF hot AND dry THEN medium 0.20

R5 IF hot AND NOT dry THEN fast 0.20

Steps 3-5 Mamdani (clip, max, centroid) -> 45.04 %

Sugeno (weighted average) -> 45.88 %

Firing strength = how strongly a rule applies (0 to 1). Several rules usually fire at the same time; R1 does not fire because 30 °C is not cold.

§1.3 Steps 3 to 5: the inference diagram

Slide L23-S08

Each row is a rule: read the input degrees, take the min, clip the THEN set. Aggregate the clipped sets with max, then find the centroid z* = Σ μ(z)·z / Σ μ(z) - the balance point of the shape.

2. Mamdani Inference

§2.1 Implication: clip or scale

Slide L23-S10

input clip scale

30 C, 40 % 45.04 44.51

36 C, 70 % 82.78 83.33

34 C, 65 % 81.43 83.33

Method

Rule output

Shape

Clip (min) - Mamdani

min(μTHEN(z), w)

Flat top at height w

Scale (product) - Larsen

w · μTHEN(z)

Same shape, shorter

§2.2 Defuzzification methods

Slide L23-S11

method 30 C/40 % 36 C/70 %

centroid 45.04 82.78

bisector 43.66 84.64

mom 33.00 95.00

som 0.00 90.00

lom 66.00 100.00

Method

Rule

Centroid

Balance point (centre of area) - smooth, most used

Bisector

Line that splits the area in two halves

MOM

Mean of the z values with the highest μ

SOM / LOM

Smallest / largest z with the highest μ

Example: a flat top from 20 to 60 gives SOM = 20, LOM = 60, MOM = 40. Maximum methods can jump (33 -> 95 above); centroid changes smoothly, which is why controllers use it.

3. Sugeno Inference

§3.1 Zero-order and first-order

Slide L23-S13

In a Sugeno (Takagi-Sugeno-Kang) system each THEN-part is crisp: a constant (zero-order) or a linear formula z = p·t + q·h + r (first-order). The output is the weighted average z* = Σ wi zi / Σ wi.

Rule

w

z

w · z

R2 slow

0.33

17

5.67

R3 medium

0.33

50

16.67

R4 medium

0.20

50

10.00

R5 fast

0.20

83

16.60

Sum

1.07

48.93 -> 48.93 / 1.07 = 45.88

input zero-order first-order

30 C, 40 % 45.88 49.31

36 C, 70 % 83.00 85.80

45 C, 40 % 72.00 85.00

45 C, 90 % 83.00 95.00

§3.2 Mamdani vs Sugeno

Slide L23-S14

input Mamdani Sugeno

20 C, 50 % 50.00 50.00

30 C, 40 % 45.04 45.88

33 C, 60 % 80.56 83.00

36 C, 70 % 82.78 83.00

42 C, 35 % 65.46 66.50

Work per input:

Mamdani: 5 clipped sets x 101 points, max, centroid

Sugeno: 5 products, 2 sums, 1 division

Mamdani

Sugeno

THEN-part

Fuzzy set

Constant or linear formula

Steps 4-5

max + centroid

Weighted average

Speed

Slower

Fast

Easy to read

Very

Less

Learn from data

Hard

Easy (ANFIS)

§3.3 Choosing a method

Slide L23-S15

Mamdani when people must read and check the rules (expert advice, e.g. a cotton-disease advisor). Sugeno for fast control in small chips (inverter AC, cruise control) and for learning from data (ANFIS, P11). Tsukamoto (1979) uses monotonic THEN sets and a weighted average; it is rarely used today.

4. Common Mistakes

Wrong idea

Correct idea

Only the strongest rule matters.

All firing rules contribute.

AND of 0.33 and 0.67 is 0.22.

Standard AND is min: 0.33.

Sugeno divides by the number of rules.

Divide by Σ wi.

Mamdani clips the input set.

It clips the THEN (output) set.

Defuzzify each rule, then average.

Mamdani aggregates first, defuzzifies once.

Word Bank

Word

Simple meaning

Example

Inference

Reaching a conclusion from facts and rules

30 °C, 40 % -> 45 % fan

Fuzzify

Turn a number into degrees

30 °C -> hot 0.20

Firing strength

How strongly a rule applies

R5 = 0.20

Implication

Shaping the THEN set by the strength

clip at 0.20

Aggregation

Joining all rule outputs

max

Defuzzify

Turn a fuzzy set into one number

centroid 45.04

Centroid

Balance point of a shape

Σ μz / Σ μ

Weighted average

Average where each value counts by its weight

Σ wz / Σ w

Self-Check Questions

  1. List the five steps of fuzzy inference in order. (see §1.1)
  2. Find the five firing strengths at 34 °C, 20 % humidity. (see §1.2)
  3. What does the max in aggregation do? (see §1.3)
  4. Clip vs scale: draw both for strength 0.5. (see §2.1)
  5. SOM, MOM, LOM for a flat top from 40 to 80? (see §2.2)
  6. Sugeno: strengths 0.3 (z = 20), 0.7 (z = 70). Output? (see §3.1)
  7. Give two reasons to choose Sugeno. (see §3.2)

Reading: Fuzzy Logic Toolbox User's Guide Ch 2 (fuzzy inference process, Mamdani and Sugeno systems); scikit-fuzzy documentation (defuzz).

← All CS-511 material